Φ52mm 行星齿轮箱

产品分类：

市场价

Yuan

0.0

零售价

Yuan

0.0

浏览量:

1000

数量



直流减速电机规格:

齿轮箱规格:

52mm

产品详情

齿轮箱规格:

52mm

General & Basic information/通用基本信息
NO.	Description/描述	Value/值
1	Outer diameter/外径	Φ52mm
2	Type of Gearbox/齿轮箱种类	Planetary/行星式
3	Housing material/外壳材质	Steel/钢件
4	Type of teeth/齿种类	Straight/直齿 Helical gear/斜齿
5	Teeth material/齿材料*	Plastic/塑胶 Steel/钢件
6	Output shaft material/输出轴材料	Stainless Steel/不锈钢
7	Bearing at output/输出端轴承	Ball Bearing/滚珠轴承
8	No-load backlash/空载时齿轮回差	≤2°
9	Number of stages availability/可选齿轮级数	Optional 1 stage,2 stages,3 stages
10	Axial play/轴向串动量	≤0.3 mm
11	Radial play/径向串动量(15mm from flange/距法兰盘15mm)	≤0.05 mm
12	Dynamic Max. axial load/轴向动态最大负载	≤100N
13	Max. force for press fits/输出轴最大允许安装力	≤300N
14	Max. radial force/输出轴最大径向负载(15mm from flange/距法兰盘15mm)	≤200N
15	Operating temperature range/工作温度范围	-40°C to +120°C
16	Operating relative humidity/工作湿度范围	20%RH to 90%RH
In ST52PH series,plastic in 1st stage,steel in 2nd and 3rd stage.
* 在ST52PH系列里，首段为塑料齿，其他第2段和第3段分别为钢齿。

Technical Data/技术参数
NO.	Description/描述	Value/值
17	Number of gear stages/齿轮级数	1	2	3	4
18	Reduction ratio/减速比	3.789:1 4.313:1 5.077:1 6.3:1	The ratio can be one of combinations of 4 ratios
19	Max. continuous input speed/最高允许连续输入转速	6000rpm	6000rpm	6000rpm	6000rpm
20	Max. intermittent input speed/最高允许瞬间输入转速	8000rpm	8000rpm	8000rpm	8000rpm
21	Max. continuous torque/最高允许连续扭矩	2,000mNm	5,000mNm	25,000mNm	25,000mNm
22	Max. intermittent torque/最高允许瞬间扭矩	3,000mNm	7,500mNm	37,500mNm	37,500mNm
23	Direction(from the driver to output) /旋向(从驱动器到输出)	Same	Same	Same	Same
24	Max. efficiency/最大效率	85%	72%	61%	52%
25	Weight without motor/无电机时质量(g)
26	L[mm]=Length without motor/无电机时单体齿轮箱的长度	49.2	64.6	77	89.4
27	L1[mm]=Length with motor/齿轮电机的长度	The total length of gear motor depends on the motor specified. 齿轮电机的总长根据具体选定电机而确定。

Reduction ratios/减速比	Motor pinion specifications/电机齿参数
	Material 材料	Number of teeth 齿数	Length 长度	Hole diameter 孔径(D)
6.3:1 / 23.9:1 / 27.2:1 /32.0:1 /39.7:1 / 150.4:1 / 171.2:1/201.5:1/250.0:1	Steel/钢件	z=10	L=10	Φ4.0
5.1:1 / 19.2:1 / 21.9:1 / 25.8:1/97.7:1/111.2:1/130.1:1/162.4:1		z=13	L=10	Φ6.0
4.3:1 / 16.3:1 / 18.6:1 / 70.5:1 / 82.3:1/94.4:1/117.2:1		z=16	L=10
3.8:1 / 14.4:1 / 54.4:1 / 61.9:1 / 72.9:1/90.4:1		z=19	L=10